Screenshots are taken from Professional version thus may slightly differ from other versions (e.g.Home Edition, etc.): You have now succesfully configured Windows XP to connect to eduroam network.I cannot get WPA2 enterprise to work on my network. Windows Domain, using IAS and its own CA Linksys WAP200 Access Point I setup the AP to use WPA2-Enterprise Mixed using RADIUS I setup and registered IAS on the domain controller.I added the AP as a client with and have tried using both RADIUS Standard and Cisco as the RADIUS type.It says something about windows not finding a certificate.
In the next window click on the "Authentication" tab, Make sure "Enable IEEE 802.1x...." checkbox is UN-Checked, the rest of this window should be greyed out.We are constantly looking to add motivated and talented software engineers to our team.Abstract This article describes the tools used to troubleshoot a Microsoft Windows XP or Windows Server 2003-based wireless client, a wireless access point (AP), and the Internet Authentication Service (IAS) when using Institute of Electrical and Electronic Engineers (IEEE) 802.1X authentication for IEEE 802.11-based wireless connections.WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.I am using the Windows Wireless Connection Manager. On a couple of occasions I've seen that particular AP (don't know what firmware) suddenly stop attempting to authnenticate clients (it never sends any RADIUS requests) and power-cycling the AP "fixes" the issue.